Manhattan Plaza ST 100 Instruction Manual

Digital Satellite ReceiverPLAZA MODELSST 100 / ST 120ST 200 / ST 300PLAZA MODELSST 100 / ST 120ST 200 / ST 300Instruction Manual(English)http://www.

10SATELLITE LISTPress SAT key and the combined channel and satellite list will appear. Select a channel from this list and exit.SELECTING RADIO CHANNE

11This menu is pre-configured and ready to upgrade. Select Start and press OK. If you have a motorized antenna, it will automatically

12ELECTRONIC PROGRAM GUIDE (EPG)INSTALLING FAVORITE CHANNELSThere are 11 TV and 11 Radio channel lists you can create. You can rename the headings to

13group and this will highlight these in red. When finished, press EXIT. Then store the settings.TO RENAME CHANNEL Select Rename and press OK. Sel

144. When finished the slave receiver will reboot and come up with a channel.TROUBLE SHOOTING GUIDEIf you suspect there is a problem with your receive

15RF MODULATORFrequency 470MHz to 860 MHzChannel Range UHF CH21 to 69TV standard PAL BG/ I /K PAL M, NTSC MPOWER SUPPLY Input Voltage 100 -- 240 V AC

2INTRODUCTION...2FEA

3FEATURES €• 1 LNB input, IF signal loop through, supports Universal, Single, C Band and Wide Band LNB€‚ Multiple LNB switching 0/12V, 14/18 volts,

4CONNECTORS AND DEFINITIONSPlease do not connect the power to the receiver until all other connections have been made and checked. R1: AC IN (Power C

5F13: IRDETO CARD SLOT (For Models with embedded Irdeto) Insert your smart card into this slot.We recommend that you familiarize yourself with the rem

6The receiver will automatically switch on and off at the stored times for each event. After the time has lapsed, it will reset that event

7EXAMPLE: To configure four LNB Astra 2 (28.2E), select LNB No 1 and set DiSEqC to 1Astra 1 (19.2E), select LNB No 2 and set DiSEqC to 2Hotbird 1-6 (1

8Search Mode: Select search option for each satellite. See below for options. Options with + D will also include data channels€“ Auto All - All TP, Vi

9Set Multisat Search 2, LNB No 2 and select horizontal TP from low band. Adjust skew (externally) to - value for maximum signal and quality.Set Multis